Products
We have a quantitative amount of market running products in our stock with premium quality, you can visit your desired product by clicking following links.
- Chemical composition including carbon content, alloys, and sulfur
- Material size, weight, identification, and grade
- Material heat number, which ties back to the processing batch
- Mechanical properties like tensile strength, yield strength, and elongation
- Forging can eliminate the as-cast loose defect produced during metal smelting process
- Optimize the micro-structure, the mechanical properties of forging will be better than that of castings in same material.
- The flange is the second most used joining method after welding. Flanges are used when joints need dismantling.
- It provides flexibility for maintenance.
- There are many valve designs, types and models, with a wide range of industrial applications.
- All satisfy one or more of the functions identified above.
- Valves are used to serve a variety of objectives in various industrial sectors.
- Right valve selection can determine the success or failure of the system.
- For a valve to be supreme in quality it is essential for it to be crack and leakage resistant.
- The gasket must be capable of maintaining a leak-free seal during the lifetime of the joint at the design pressures and temperatures of the fluid being transported.
- Nonmetallic gaskets are cut from flat, soft sheet; and they are used with flat-face mating flanges, generally for low-pressure class
- Semi-metallic gaskets are a combination of two or more metallic and nonmetallic materials.
- Metallic gaskets are usually constructed from one grade of metal to a predetermined size and shape.
- Folded plates of various shapes are widely used in various fields of steel construction: stair ramps for buildings, pipe connection, gas ducts in petrochemical industry, etc.
- Create all necessary plates, one by one, within the same plane or anywhere in the drawing.
- All shapes are accepted and can be easily created using a complete set of intuitive tools.
- Rectangular plates (with one central point, two or three points)
- Polygonal plates (created from a polyline)
- Any contour can be cut to get the desired shape.
- Buttweld fittings are pipe fittings used to change the pathway of a pipeline (elbows), reduce/ increase the pipe bore size (reducers), branch (tees, cross) or blind a pipeline (butt weld cap).
- ASME B16.9 (and MSS-SP 43) Buttweld fittings are used for piping systems above 2 inches in diameter, whereas socket weld and threaded fittings are used for smaller size pipes (ASME B16.11).
- Fasteners are used to create non-permanent joints; that is, joints that can be removed or dismantled without damaging the joining components.
- Steel fasteners are usually made of stainless steel, carbon steel, or alloy steel.